Expert Answers about Ford F-150, F-250, F-350
- compatible Rear Bumper and Installation Kit for a 1990 Ford F-250
- We have a rear bumper that will fit your 1990 Ford F-250 truck, but the Westin # 76001 that you referenced will not fit your vehicle.
For your vehicle, the Westin Fey Surestep Rear Bumper with Installation Kit, # 21002-92230, is confirmed to fit the 1990 F-250.
The bumper is chrome platted steel and uses a black textured step pad for traction.
view full answer... - What Camper Tie Downs are Needed on a 1991 Ford F-250 with 10' Truck Bed Camper
- I have a solution for you but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are designed to be used with truck bed campers up to 8' in length so they would not work for your 10' camper. You will want to use the Brophy Clamp On Camper Tie-Downs # HSSF which don't have a length and weight limit. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP for securing the camper to the tie downs.
Something to note is that the # HSSF is not going to work...
view full answer... - Gooseneck-to-5th Wheel Trailer Hitch Adapter for 1990 Ford Flatbed Truck With Recessed Ball
- When installing the B&W Companion # BWRVK3050 the entire hitch adapter must be able to be lowered in order for you to use it. Unfortunately, you will not be able to use this adapter since you cannot fit the Companion in the recess on your truck.
Instead, you need the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs # DM8550046. This will allow you to convert your recessed gooseneck hitch into a 5th wheel hitch. In order for this to work...
view full answer... - Does Curt A30 Fifth Wheel Hitch Fit Same Rails as A25
- The Curt A30 part # C66HR does fit the same base rails as the A25 you have now and are considering selling. So the A30 would easily replace what you have and offer more weight capacity.
view full answer... - Will Curt Universal 5th Wheel Trailer Hitch Installation Kit fit a 1988 Ford F-250 SuperCab Long Bed
- According to the installation instructions, see link, for Curt installation kit # C16100 or # C16200, it will fit Ford F-150 and F-250 trucks up through 1996 model years so that means it will fit your 1988 Ford F-250. And either kit will fit with 5th wheel trailer hitch # C16115.
view full answer... - Rear Bumpers And Installation Kits For a 1994 Ford F-350 Dually With Standard Truck Bed
- Here is a list of the rear bumpers which will fit your 1994 Ford F-350 Dually as long as you have a regular truck bed. These are not designed to fit on trucks with aftermarket flat beds or truck boxes.
Surestep Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21002-92230
Surestep Deluxe XLT Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21007-92230
Surestep Rear Bumper with Custom Installation Kit - Silver Powder Coated Steel # 20022-92230
Diamondstep...
view full answer... - Can I Use HappiJac Brackets With Another Brands Camper Jacks
- We do not carry the Reico-Titan products so my research was more limited but after doing some research I was able to locate the installation instructions for the Reico-Titan Jacks. They have brackets listed specifically for the "C" clamp mounting style. I have included a picture from the installation instructions that shows how they attach.
The Replacement L-Bracket # LC182492 paired with the Replacement Flat Bracket # LC182494 is going to be more comparable to the bracket style used in...
view full answer... - How to Use the Vision X Headlight Conversion Kit Part # VX-46 on a 1986 Ford F-Series Truck
- The Vision X Headlight Conversion Kit part # VX-46 is a headlight housing and does not come with the headlight bulb. You can add the headlight bulbs to this housing using part # VX-L9007. You would need cut off your existing headlight bulbs pigtail and wire it to the harness included with the housing using part # DW01899-1. You will need 6 of the spade terminals in order to wire the new harness.
If your 1986 Ford F-Series truck uses a 9007 headlight bulb then you will not need to use the...
view full answer... - Will Brophy Camper Tie Downs # TDSF Fit on 1989 Ford Full-Sized Truck
- The Brophy Camper Tie Down # TDSF is a compatible fit for your 1989 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation.
I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product.
view full answer... - Can Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 be Used with 5th Airborne Pin Box
- You can use the Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 with a 5th Airborne pin box as long as it is not a Sidewinder 5th Airborne pin box. So if you have # 5AB-E1621-610, which is a regular 5th Airborne pin box, it will work with # 9480.
You mentioned a Un-A-Goose hitch which I have not heard of. If it is a Hide-A-Goose hitch then 9480 will work. But if not then the Hi-Rise is not confirmed as a fit for other models.
view full answer... - Air Lift Air Springs for a 1988 Ford F-250 That Are Compatible w/ a B&W Gooseneck-5th Wheel System
- We do have what you need, but the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88215 will not work with an in-bed hitch like the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1110-5W (for Overload Springs).
Instead, you would want to use the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88298 which will work with an in-bed hitch like the B&W Companion 5th Wheel Trailer Hitches # BWGNRK1110-5W...
view full answer... - Recommended Chrome Rear Bumper for a 1988 Ford F-250
- We have a chrome plated rear bumper that is a confirmed fit for your 1988 Ford F-250 and comes with the installation hardware needed.
It's the Westin Fey Surestep Rear Bumper with Custom Installation Kit, part # 21002-92230. It has 3 hitch ball holes with a towing capacity of 8000 pounds and tongue weight capacity of 800 pounds. I've linked to a video review of it below.
The one that you referenced, part # 76001, will not fit your F-250.
view full answer... - Best Suspension Enhancement for a 1988 Ford F-350 with In-Bed Hitch
- I do have a suspension enhancement option for you but the Firestone Ride-Rite Air Helper Springs part # F2071 will not work with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1110 on your 1988 Ford F-350 as the upper airbag brackets interfere with the mounting brackets for the gooseneck hitch.
For a similar type of suspension enhancement that will work with your gooseneck hitch, I recommend the Timbren Rear Suspension Enhancement System part # TFR350SDE. The Timbren...
view full answer... - Will the Derale Radiator Race Fan # D17420 Replace the Factory Fan in a 1988 Ford F-250
- The Derale 20 Inch Race Fan, # D17420, has a 19-7/8 inch diameter so it will fit within your 22 inch shroud. One thing to keep in mind with this fan is that it is a race fan which means it will require you to remove your fan clutch as well. It is designed to pull more air as your engines RPMs increase and not to be regulated by a clutch.
Removing the factory clutch will effect the length of the spacer that you need. Once you have the clutch removed, you will want to measure from the water...
view full answer... - 5th Wheel Hitch Fit for a 1987 Ford F-350 with Demco SL Series Base Rails
- The Demco Hijacker SL Series 5th Wheel Trailer Hitches used none industry standard base rails that were specific to the hitch. If you currently have the Custom Installation Kit w/ Base Rails for Demco Hijacker SL Series 5th Wheel Trailer Hitches part # DM8553003-12 installed then you can use the Demco Hijacker SL Series 5th Wheel Trailer Hitch part # DM6076SL-16K or the Demco Hijacker SL Series 5th Wheel Trailer Hitch part # DM6076SL-21K.
I have attached an install video of the above hitch...
view full answer... - Does Curt 14001 Fit A 1989 Ford F-150
- Yes, based on your information the Curt Trailer Hitch Receiver, Item # 14001, is a confirmed fit for your 1989 Ford F-150 if you have a standard or step bumper. It has a bolt-on installation and no welding is required.
I have attached a video for you check out.
view full answer... - Will Hopkins Tailgate EasyLift Fit 1991 Ford F-150 Pickup Truck
- The Hopkins Tailgate EasyLift, part # 74211 will fit your 1991 Ford F-150 if your truck is not the SuperCrew model.
This assist reduces the weight of a 30 to 40 lb tailgate to 4 to 7 lbs. Drilling is required for installation. I have attached a product review for this tailgate assist you can check out.
view full answer... - Will Hopkins Tailgate EasyLift Work On 1991 Ford F-150 Supercab Lariat XLT
- The Hopkins Tailgate EasyLift, part # 74211 will fit your 1991 Ford F-150 if your truck is not the SuperCrew model. This assist reduces the weight of a 30 to 40 lb tailgate to 4 to 7 lbs. Drilling is required for installation. I have attached a product review for this tailgate assist you can check out.
view full answer... - Will the Flint Hill Goods Cargo Carrier with ramp Part # FHG69ZR Work on a 1987 Ford F-150
- As long as your 1987 Ford F-150 has a 2" trailer hitch receiver like the Curt Trailer hitch Receiver part # 13028 then yes, the Flint Hill Goods Wheelchair Carrier part # FHG69ZR will fit on your truck.
The only concern that I have is the height of your truck. You will need to decide if a 60" ramp will make the ramp too steep for your application. Take a look at pictures on this product page of this product on other trucks and see if you think that will be okay for you.
You will...
view full answer... - Gooseneck Hitch for Flatbed 1985 Ford F-250 Truck
- You can definitely add a gooseneck hitch to your 1985 Ford F-250 flatbed truck, it will simply require a gooseneck designed for that purpose. The hitch you will need is the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500.
This hitch should be about flush with the bed, as you can see by the accompanying photo that a customer sent in of the hitch installed on their flatbed. The hitch does need to be welded to the bed so it is possible you may not need to...
view full answer...
Go To Results